Shaker Wooden Hotel Bathroom Door Structure
CONSTRUCTION | |
General | Tongue & groove structure with wood dowel connected between stiles and rails |
Species | Not related |
Size | Standard thickness as 40mm, customized size available |
STILES AND RAILS | |
Veneer | Not related |
Core | Finger-joint softwood laminated with MDF |
Sticking | MDF square sticking |
Edge Band | MDF |
PANEL | |
Flat MDF panel | |
Tempered glass panel available (clear or frosted type) | |
PAINTING OPTION | |
White primed or white painted, PU or waterborne paint available | |
We make knocked down and prehung packaging for shaker type hotel door.
1. For knocked down packaging, if the door is without glass or mirror, we wrapped the door with PE film and
piled on pallet, all sides of pallet will be protected by 3mm plywood with protecting carton at pallet corners.
Then pallet fastened by plastic packing strips.
2. For knocked down packaging with glass or mirror, we make PE film wrapped on the door, EPE foam under
and above the PE film, then put into cartons and piled into wood crate.
3. For prehung packaging, we install the door slab, door jambs, casings togeter into a MDF or softwood frame,
then you can install the door directly.
Jambs & Casings
Shaker type hotel door jambs and casings specification.
Wood frame size | 80-350 width, 25mm thickness, customized is available |
Rabbet design | One or two rabbets are available |
Surface treatment | One side or both sides primed |
Color selection | White,other color is available |
Rubber seal groove | Reserved |
Raw material | Plywood, softwood, MDF, hardwood or other is available |
Casing option | Standard casing in store, customized is available |