Hot melt glue bottom sealing erection equipment

Hot melt glue bottom seal case erector equipmentTechnical Parameters Carton erector:ModelSDW-K20TKVoltage220 V 60HZ 400WAir pressure6 kg/cm²Gas consumption200 L/minMachine shapeL2500mm×W1950mm×H1500mmMachine weight550kgCarton sizeL11.875 "* W 10.125"H5.5 "~L16 "*W11 "*H12.875 "

Featured Products

Hot melt glue bottom seal case erector equipment

Hot Melt Glue Bottom Seal Case Erector Equipment

Technical Parameters

 Carton erector:

Voltage220 V 60HZ 400W
Air pressure6 kg/cm²
Gas consumption200 L/min
Machine shapeL2500mm×W1950mm×H1500mm
Machine weight550kg
Carton sizeL11.875 "* W 10.125"H5.5 "~L16 "*W11 "*H12.875 "
Conveyor speed≤16 cases/min
Single production efficiency≥95%
Carton loss rate1 ‰
Open carton typeVertical & hot melt


Hot Malter

Technical Parameters ProBlue 7
Glue Cylinder Volume 7L
Holding Capacity6.8kg
Melt Speed*28.2kg/hr
Max. Pump Rate32.7kg/hr
Air pressure Range48-415kpa(10-60psi)
Input Voltage StandardAC200-240V 1PH 50/60HZ
Machine Size609*469*322mm
Machine Weight44kg
Ambient Temperature Range0-50 ºC
Temperature Range40-230 ºC
Max. Working Hydraulic Pressure8.7Mpa
Levels of protectionIP54


Main characteristics

 Carton erector:

1.Easy operation,machine can be used individually and combined with the packaging line. 

2.The storage box mechanism: Can accommodate 50 cartons (depending on the carton thichness), and can be added at any time

3.Adopt Nordson hot melter.

4.Manually adjust to change the carton sizes(finishing in 2-3minutes).

5.Advanced photoelectricity induction control system.

6.Rationally designed, the forming, folding and sealing process are accomplished simultaneously.

7.Cutter Safety system to prevent hands form stabbed by the cutter. 

8.Equipped with PLC(Siemens) system, saving labor and easy to operate.

9.Adopted international advanced technology, with imported parts and electrical components, this machine has a stable performance and long life-using.

10.The equipment design meet the process requirements and production line layout, beautiful appearance, good manufacturing process

11. Vertical storage,cartons can be added at any time without stopping the machine.

12.The machine has security protection function, such as overload protection and safety door etc.

13. Alarm function if there is no cardboard box


Hot Melter---Norsand Problue 7

 Nordson hot melter:
Hot Melt Glue Bottom Seal Case Erector Equipment

 Primary Features    

*Approximately twenty percent smaller size
*Approximately fifty percent smaller service envelope

*Easy-to-use controls
*High-level noise immunity
*Rugged,non-handed design
*Proven Nordson SP dual-acting piston pump
*Cast-in heater
*PID temperature control
*Automatic Pressure Discharge Valve
*Low-level adhesive indicator

Product Detial

Hot Melt Glue Bottom Seal Case Erector Equipment

About us

Qingdao Ausense Packaging Equipment Co., Ltd  is new a high-tech enterprise,which is specialized in research and manufacture of automatic conveyor and packaging machinery.A variety of conveying equipments are
designed,planed and produced by Ausense,such as various roller conveyor lines,belt line,Retractable conveyor,chain conveyor,fixtures plate conveyor line,mesh belt conveyor,PCB plug cable,logistics system sorting machine,elevator,stacking machine,three-dimensional storage,and some other automatic production line and conveying equipment. Ausense's product has gain favour of many top 500 enterprise in china.

Hot Melt Glue Bottom Seal Case Erector Equipment

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours